Atlona AT PROHD85M SR Manuale Utente Scaricare il pdf (Pagina 7)

www.atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Note: A single CAT5 connection can be used in systems not requiring IR extension through the supplied

receivers. If a single CAT5 connection is utilized the embedded EDID setting choice from the dip switch will

be the default for all connected devices. For a single CAT5 connection please use the RJ45-2 ports only.

3. EDID configuration: There are three options to consider for EDID configuration. Please make sure all

sources and displays are connected to the AT-PROHD85M-SR before proceeding with any EDID

configuration.

A). Auto EDID: Please set the dip switch to “0000” (off). Power cycle the AT-PROHD85M-SR by turning

power off then back on. All connected output displays EDID’s will be copied and forwarded to all connected

sources and the lowest common denominator will be locked in.

Example: If there is a mix of video resolutions and audio formats such as Dolby Digital, Stereo, 1080p, 720p,

the AT-PROHD85M-SR will default to 720p/Stereo as it is the lowest common denominator, thus all

connected devices will be functionally compatible with each

other.

B). Embedded EDID within AT-PROHD85M-SR: Select the

appropriate setting from the rear panel dip switch. Power cycle

the AT-PROHD85M-SR by turning the power off, then back on.

All connected inputs and outputs will be configured for this fixed

setting.

Example: If you select the combination 1-0-0-0 from the

dip switch the AT-PROHD85M-SR will default to dual CAT5,

1080p/2ch for all connected devices.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Nessun commento

Atlona AT PROHD85M SR Manuale Utente Pagina 7